Home » Companies » Open Joint-Stock Company Kuzlitmash

Open Joint-Stock Company Kuzlitmash

Belarus
Number of employees: 100+
Belarus, 225710, Brest region, Pinsk, Joltovskogo avenue, 109
Write a Message
Forging and foundry equipment manufacturer




Goods
Belarus
Designed to produce cast iron and steel castings of a wide range and high quality in serial and small-scale production.
Belarus
Designed for the manufacture of one-time half-forms from sand-clay mixtures in small-scale and mass production.
Belarus
Designed for sifting fresh sand and spent molding sand in foundries, as well as for sifting other granular materials (clay, chalk, soda, crushed stone, etc.).
Belarus
Complexes (mod. 99911M and 99913M) are intended for mechanization of works on cleaning pig-iron and steel castings (to remove castings, gating system residues, burns) with an abrasive grinding wheel i...
Belarus
It is intended for preliminary cleaning of surfaces of cast and forged parts that are not subjected to battle and deformation during tumbling, of the molding sand, burnout and scale, knocking out simp...
Belarus
Designed for sifting fresh sand and spent molding sand in foundries, as well as for sifting other granular materials (clay, chalk, soda, crushed stone, etc.).
Belarus
Used for bending pipes and fittings in blank production shops of machine-building and repair enterprises as well as enterprises of construction industry.
Belarus
The shears are intended for cutting the steel shapes (rounds, strips, squares, angle pieces).
Belarus
Single -action open-frame single - crank presses -noninclinable with fixed-position table and normal table dimensions. They are designed for various cold pressing operations: punching, piercing, bendi...
Belarus
Press mod. НП4116 is designed for cutting in blanks along the contour of corners with an angle at the apex of 90 degrees. and more. Combined press mod. НИП4216 is designed for cutting corners with bla...
Belarus
Hydraulic shears with an inclined knife are designed for cutting sheet metal.
Belarus
Crank sheet scissors with an inclined knife are designed for cutting sheet material.
Belarus
Designed for the manufacture by cold extrusion of various products such as glasses and rods.
Belarus
Designed for cold stamping, requiring high specific pressures, with small slider strokes (chasing, calibration, lapping, volume shaping), as well as cold extrusion of steel parts. Modes of operation: ...
Belarus
Presses are intended for the manufacture of parts from sheet material with the operations of cutting, punching, relatively shallow drawing and other cold-stamping operations. On the press mod. KP9534 ...
Belarus
These presses are assigned for pressing various details and can be used for stitching, flattening out, punching and other operations and, if proper equipment available for different shape details proo...
Belarus
Combined hydraulic press for bending and cutting of sheet material is designed for bending and cutting of sheet material in one machine.
Belarus
The machine is designed for the manufacture of various parts from sheet metal by bending.
Belarus
Presses are designed for the manufacture of parts from sheet and strip products by bending.
Belarus
Presses are designed for the manufacture of parts from sheet and strip products by bending. In the universal V-shaped stamp supplied with the press, a large number of different parts can be bent.
Belarus
The presses are designed for the production of parts from sheet and strip products by bending.
Belarus
Numerically controlled presses are designed for the manufacture of parts from sheet and strip products by bending.
Belarus
Horizontal hydraulic press mod.PP6738A is designed for pressing and pressing wheel sets of railway cars. It can be used for extruding and pressing in bushings, bearings, gears and other similar works.
Belarus
Mechanized lines are designed for the production of nets according to GOST 3306-88 from high-carbon and high-alloy thermally untreated wire with a diameter of 1.6 to 6.0 mm.