Home » Companies » State Scientific Institution «The Joint Institute of Mechanical Engineering of the National Academy of Sciences of Belarus»

State Scientific Institution «The Joint Institute of Mechanical Engineering of the National Academy of Sciences of Belarus»

Belarus
Number of employees: 100+
Belarus, 220072, Minsk region, Minsk, 12 Akademicheskaya str.
Write a Message
The basic directions of scientific and scientific and technical activity: • Engineering science, mechanics, reliability, safety and environmental friendliness of machines; processes of functioning, theory, methods of calculation, modeling, design and testing of machines, their components and systems, including mechanical, hydraulic, electric and combined transmission systems, electronic control systems for units and aggregates of mobile machines; friction and wear in machines; new composite, polymeric, metal, nano- and microstructured materials; control of the structure and properties of the surface, including at the nanostructured level. • scientific provision, organization and coordination of works on the creation of export-oriented tractor and combine machinery, which is equipped with multi-level integrated electronic systems for adaptive control and diagnostics of units and assemblies, including mechatronic components and intelligent devices. • verification of conformity (certification) of engineering products to the requirements of the Technical regulatory legal acts of the National System of Conformity of the Republic of Belarus, technical regulations of the Customs Union; certification of management systems for compliance with the requirements of STB ISO 9001-2009; bench, road tests, diagnostics of the technical condition of mobile machines.
Certificates




Goods Services Technologies
Belarus
Lubricant OIMOL KSC WR 2 – water resistant is processed on the basis of a mineral base oil with a kinematic viscosity of 250–500 mm2/s at 40 °C and a complex thickener of calcium sulfonate.
Belarus
Lubricant OIMOL KL MP 2 – multipurpose is made from the mixture of mineral oil with kinematic viscosity of 60–110 mm2/s at a temperature of 40 °С thickened with lithium complex and contains additives ...
Belarus
Lithium-calcium lubricant ITMOL LC HD 2 is obtained on the basis of a mixture of highly purified mineral oils with a kinematic viscosity of 80...100 mm2/s at a temperature of 40 °С, thickened with lit...
Belarus
Lubricant OIMOL KL EPR 2 — anti-seize is processed with thickening of mineral oils with a kinematic viscosity of 150–350 mm2/s at 40 °C with complex lithium thickener. The lubricant contains carefully...
Belarus
Lubricant OIMOL KL EP 2 — antiwear is processed on the basis of the mixture of highly purified mineral oil with a kinematic viscosity of 80–100 mm2/s at a temperature of 40 °С, thickened with lithium ...
Belarus
Environmentally safe lubricants ITMOL LC FN are processed with thickening of lithium-calcium soap with highly neutral mineral oil. Lubricants ITMOL LC FN have passed sanitary tests in RUE “Scientific ...
Belarus
ITMOL LC FM lubricants are processed with the thickener of lithium-calcium soap of highly purified medical petroleum jelly. The ITMOL LC FM lubricants have passed hygiene tests at the RUE “Scientific ...
Belarus
Lubricant OIMOL KL R 2 — running-in is made with thickening of mineral oil with kinematic viscosity of 60–110 mm2/s at 40 °С with complex lithium thickener.
Belarus
Micro- and grinding powders of cubic boron nitride are intended for manufacture of superhard composite material. The tool with cutter inserts made of superhard composite material based on cubic boron ...
Belarus
It is intended for reconditioning (hardening) of worn out cylindrical surfaces (brake drums, shafts, shafts working in conjunction with rolling (sliding) bearings, of flat parts (guides, friction disc...
Belarus
With the use of the principle of gas-dynamic activation, a design of a thermal sprayer has been developed, that makes it possible to regulate the density of the heat flux of the gas-flame torch, which...
Belarus
Selection and justification of optimal parameters of ringrolling complexes: • obtaining of ring blanks with a shape as close as possible to the shape of the finished part; • grouping of ring blanks ac...
Belarus
Use of dynamic stabilization in the technological process of manufacturing of friction discs for mobile wheeled and tracked vehicles.
Belarus
Mechatronic control system of working elements of machine-tractor unit allows: - to position the hinged device; in the automatic mode, to regulate depth of ploughing (power, positional, high-rise regu...
Belarus
The system provides periodic information on current vibration parameters, their processing, analysis and output of diagnostic results to the instrument panel of a mobile device for timely informing th...
Belarus
ABS / TCS with road holding and anti-rollover function provides requirements for active safety of heavy-duty road-trains.
Belarus
On-board information-analytical system for determining the location of the vehicle and informing about the emergency is intended for prevention or reduction of the consequences of road accidents by: •...
Belarus
Switching unit for commercial vehicles of new generation with electronic control system provides power distribution to consumers and electronic devices of electrical equipment of the vehicle, “polling...
Belarus
Range of electric traction drives based on permanent magnet synchronous electric machinesin the power range from 10 to 80 kW has been developed for use in passenger and light commercial electric vehic...
Belarus
A prototype of on-board liquid-cooled charger with a total power of 18 kW has been developed and manufactured.
Belarus
Competencies: - selection and testing of the element base; - simulation of thermal processes and design of battery temperature control systems; - development of traction battery design and control sys...
Belarus
Control inverter is designed for control of traction motor with power from 10 to 200 kW. Specifications: nominal power – 80 kW; input voltage – 400 V; nominal current – 200 A; peak current – 800 A; co...
Belarus
Hypersonic metallization – a method of high-speed application of protective coating against wear, corrosion, etc. with spraying by a high-speed stream of molten metal wire in an electric arc (in autom...
Belarus
Formation of multifunctional coatings on internal, external, end and simultaneously on several surfaces of parts with various antifriction and wear-resistant materials and charges based on them, inclu...
Belarus
Formation of coatings is carried out using carbon and carbon-containing nanomaterials (CNM). Addition to the electrolyte of CNM improves the efficiency of the coating formation process with improved t...
Belarus
Services • design-research; • design-engineering; • development of ergonomic solutions; • technical design project; • reverse engineering (using CAD modeling and 3D scanning software); • scale modelin...
Belarus
Design: • comprehensive product design; • research and development and experimental design work; • development, editing and correction of 3D models of any complexity; • issue of design documentation f...
Belarus
Calculation of strength and dynamic characteristics of structures: - calculations of the strength of structures taking into account geometrical and physical of nonlinearities; - simulation of fast dyn...
Belarus
The Republican Proving Ground for Mobile Machines Testing provides the following services: research, examination and certification tests of: • experimental models of mobile machines; • commercial auto...
Belarus
Center of structural researches and tribomechanical tests of materials and engineering products accredited to the compliance with the requirements of STB ISO/IEC 17025 as a testing center of mechanica...
Belarus
It conducts: - research and certification tests: determination of characteristics, indicators of purpose and effectiveness of the tested electric machines. - testing the algorithms of electronic contr...
Belarus
It conducts: - research and certification tests: determination of characteristics, indicators of purpose and effectiveness of the traction batteries and their components. - testing the algorithms of e...
Belarus
Formation of coatings is carried out by transferring the particles of the coating material (donor) with the wire bristles of the rotating metal brush at the moment of its simultaneous frictional inter...