Open Joint Stock Company "Gomel foundry and standards works"
Belarus
Number of employees: 100+
Open Joint Stock Company "Gomel foundry and standards works "GZLiN" is a member of holding "Gomselmash". The enterprise has the rights of legal entity and carries out its activities in accordance with the Charter. The company’s main activities are: -Production of agricultural machinery; -Production of foundry goods from cast iron, steel and nonferrous alloys; -Production of machine building fasteners (bolts, screws, studs, rivets, axes, etc.); -Production of foundry gear and nonstandard equipment; -Production of cold-upsetting materials and punches.
Certificates
Goods
Belarus
The combine harvester KPK-3000 can be equipped with the reshredding device of the active type for re-shredding the corn grains of wax ripeness and with the equipment for applying conservants. The comb...
Belarus
The pull-type combine harvester is intended for the mowing of corn including in the stages of wax and full ripeness of seed, sorghum, sunflower and other high-stemmed crops, for the mowing of green an...
Belarus
The mower is intended for the mowing of green seeded and natural grass with their mechanical handing (conditioning) and the laying of the mowed mass on the stubble in three windrows at the same. The d...
Belarus
The rotary mower KR-2,8 is distinctive by durability, high productivity and low consumption power, it can be operated in any conditions showing itself good at the harvesting of large areas and at the ...
Belarus
For high-quality cleaning of different kinds of herbs mower serially equipped as finger and bespaleva cutting machines. Design bespylevaja cutting device allows you to use the mower for mowing grasses...
Belarus
The mower is intended for the mowing of green grass, corn and others silage crops not more than 1,2 m height with simultaneously shredding and loading into transport units. It can be used for the mowi...
Belarus
The combine harvesters PKK-2-05 are intended for the harvesting of potato on light and middle soils, for the separation of potatoes from impurities and loading into a hopper with the following unloadi...
Belarus
The cultivator destructs all weeds by increasing the ridges till 30 cm and saves the soil friability in ridges until the harvesting. Due to that, the increasing of crop capacity per 15 % and the high ...
Belarus
Type of mower: the pull-type, one horse, with a finger-reaping unit displaced to the right.
Belarus
Reaping machines are intended for harvesting of grain cereal crops, with the use of special devices, they are also used for rapeseed, leguminous and cereal crops picking. Reaping machines can be used ...
Belarus
The windrowers for the harvesting of corn optimally way combine in themselves functionality, lightness and fastness, providing trouble-free operation during the harvesting in the most difficult condit...
Belarus
The windrower ZHZS is intended for harvesting of soya beans and cereal crops. The windrower is used in the self-propelled grain combine harvesters KZS-7, KZS-812, KZS-1218. The windrower for soya bean...
Belarus
The windrower provides perfect productivity, thanks to a small drum, the plant mass is quickly catched by the windrower, at the same time, it provides reliable and effective process independently from...
Belarus
Two cutting bars, with wedge profile and which are located in one line on the frame, create conditions for the best quality of the mowing. The cutting bar of the disk mower cuts close to the ground an...
Belarus
The pickup head KVK-1-0900000 is intended for the pickup of the windrows of wilted seeded and natural grass. A compact design of the pickup guarantees the fast and uniform feed of mass to the feeding ...
Belarus
The design of the pickup head provides the shortest way of haylage mass to the feeding unit increasing the stability of the pickup process.
Belarus
The Reaper is designed for mowing seeded and natural grasses. The header provides a copy of the relief of the field in the longitudinal and transverse directions at a given height of the cut. This hea...
Belarus
Reaper for coarse-stemmed crops is designed for mowing corn in any phase of ripeness of grain, sorghum, sunflower and other coarse-stemmed crops. Uniform cut is provided by the system of copying the r...
Belarus
The picker is designed for the selection of rolls of dried and natural herbs. Longitudinal-transverse copying of the relief of the field and adjustment of the height of the selection provides a clean ...
Belarus
Жатка для трав. Система копирования рельефа поля и установка высоты среза гарантирует одинаково ровный срез. Обгонная муфта шкива привода мотовила предотвращает повреждение мотовила при обратном враще...
Belarus
Жатки ПС-8 и ПС-12 предназначены для уборки подсолнечника. Высокая производительность и бережное отношение к зерну подсолнечника – главные особенности жаток ПС-8 и ПС-12, которые одинаково эффективно ...
Belarus
Harvester HMP-1,8 – two-row vertical spindle bar cotton-picker which is used for picking of middle length fiber cotton planted in rows with row spacing of 90 cm. The harvester is used along with tract...
Belarus
The two-row harvester with a side tunnel is designed for harvesting potatoes on light, medium and heavy soils, separating it from impurities and accumulation in the hopper with subsequent unloading. T...
Belarus
The hopper-loader Bz-1 is designed for grain transportation and subsequent unloading in places of storage and processing, or in the trailer vehicle for transportation, and also to download seeders. Th...
Belarus
Grain swath headers JVZ-7U, JVZ-9U are used both for mowing and putting in swaths stalks of spiked cereals (wheat, rye, barley, oat, cereal crops and rape) with separate type of harvesting and for mow...
Belarus
The windrowers provide the laying of the windrow of good quality and optimally width, the high productivity of operations on the mowing and pickup; the relief of the working conditions of an operator,...
