Home » Goods » Machinery, Industrial Parts & Tools » Machinery » Machine Tool Equipment » Screw-cutting lathe GS526U
Screw-cutting lathe GS526U
Sector: Machine Tool Equipment
Price: Contract Price
Minimum Order: 1шт.
Packaging: wooden box
Terms of Delivery: FCA Gomel
Full Product Information:The machines are designed to perform a variety of turning operations and for cutting threads: metric, modular, inch, pitch. The machines are equipped with an apron with a built-in accelerated displacement engine and a feed box that allows you to thread 11 and 19 threads per inch without replacing the replacement gears in the gearbox. The designation of the machine model GS526U acquires additional indexes: "C" - when the machine is equipped with a drilling and milling device designed to perform drilling, milling and threading at different angles on the parts installed on the support of the machine; "B" - when ordering a machine with a diameter of workpiece processing over the support-420mm; "G" - when ordering a machine with a recess in the frame; "D" - diameter of the cylindrical hole in the spindle 70mm; "D1" - diameter of the cylindrical hole in the spindle 95 mm; "K" - when ordering a machine with a closed rear area; "L" - when ordering a machine with the price of dividing the lateral movement limb 0.02 mm; "M" - when ordering a machine with a mechanized drive of the upper part of the caliper; "C" - a Machine with various digital display devices and linear displacement converters; "RC" - when ordering a machine with a digital indexing device and linear displacement converters and stepless control of the spindle speed; "E" - when delivering a machine marked" CE " and complying with the safety requirements of the EU Directives. Machines of the GS526U model are produced with a distance between the centers (RMC) 1000mm, execution GS526U-01 with RMC 1500 mm, execution GS526U-02 with RMC 2000 mm, execution GS526U-03 with RMC 3000mm. Combining the index in the designation of the machine model when ordering, you can get the machine of the required equipment. in the designation of the machine model when ordering, you can get the machine of the required equipment. The largest diameter of the workpiece, mm above the frame/ over the support-500/275. Diameter of the cylindrical hole in the spindle, mm - - 55. Number of spindle speeds: forward rotation/ reverse rotation-22/11. The limits of rotation frequency of spindle, min-1 - 16-2000. Limits of the working feed of the caliper, mm / Rev: longitudinal/ transverse - 0,05-2,8/0,025-1,4. Limits of steps of cut threads, mm: - metric / modular, module - 0,5...112 / 0,5...112; - inch, number of threads / pitches, pitch-56 ... 0.5 / 56...0.5. Main drive power, kW - 7.5 (11*).
Another products from the category "Machine Tool Equipment"
Lathe carriages are intended for installation on machine tools of the turning group. Different models have manual or motorized actuators are equipped with 4-position tool holders.
Rotating clamping pneumatic cylinders are meant for installation in metal-cutting machine tools as a powered chuck drive. For preventing pressure drop in cylinder hollows, when there is an unexpected ...
Electromechanical end 7921-0003 is used mainly for mechanized clamping of instrument in spindles of milling machines, and also can be used in a capacity of actuator with one-side rotating of output sh...