Sector: Industrial Adhesives
Price: 6.09 BYN
Minimum Order: От 600 кг.
Terms of Delivery: FCA Lida
Full Product Information:Scope: PVA-16 Adhesive for bonding of cardboard, paper in the packaging industry and other products on a paper basis. Allowed bundle and adhesive film formation on the surface during storage. Surface preparation: must be clean place adhesive from contamination, remove dust before applying the adhesive, dirt, etc. The surface to be bonded must be dry. Coating application: Before use, the adhesive must be thoroughly mixed, in the case of film formation, gently remove it from the surface. Glue is applied to the applicator machines, hand brush or roller. Glue is applied uniformly thin layer on one of the surfaces to be bonded. Bonding surfaces connect and tightly pressed together for 1 - 2 min. If possible, put them under pressure. Complete drying time at least 24 hours. Depending on the layer thickness, the drying time adherend may be different. Works with glue is recommended when the air temperature is not lower than 10 ° C and a relative humidity of 80%. After applying the adhesive, remove the excess with a dry cloth (rags). Glue consumption is 100 - 300 g / m2, depending on the type of work, thickness of the applied layer adherend, and other factors. on the use of data are approximate, since the effectiveness of bonding depends on many factors. To clarify the conditions of bonding should be carried out pilot tests in specific production conditions. On the surface of the skin adhesive wash with warm water and soap. After completion of work tools container and washed with warm water until the glue dries. Precautions: The adhesive should be protected from freezing. Transportation: GOST 9980.5. Storage: store the adhesive in a tightly closed container, protected from moisture and direct sunlight at a temperature not below 5 ° C.
Another products from the category "Industrial Adhesives "
CMT is bio-compatible, bio-degradable, non- toxic & modified natural polymer. CMT is derivatives of Polysaccharides composed of Glucosyl : Xylosyl : Galactosyl in ration of 3:2:1. CMT is water solutio...