Primer FRESKO Imprelid

Sector: Primers
Price: Contract Price
Minimum Order: От 600 кг.
Packaging: Plastic canister
Terms of Delivery: FCA Lida
Full Product Information:
It is intended for priming and leveling the absorbency of the walls and ceilings before applying water-dispersion paints for interior and exterior use. Primer can be used both for internal and for external works. Advantages: primer have little or no odor, it reduces the absorbency of painted bases, facilitates the subsequent application of paint layers, provides a uniform application of subsequent layers of paints, reduces paint consumption and ensure its strong adhesion to the base, economical and environmentally friendly. The primer is used for interior and exterior work. Surface preparation: Before applying the primer with facades mechanically remove moss and tar spots. Surfaces with efflorescence, it is necessary to clean the dry method (brush). When working with surfaces of this type can not guarantee the durability of the coating as well as the possible re-emergence of salt deposits and, in consequence, the debonding coating to the substrate. The surface must be clean, dry, sound, have a good load-bearing capacity and can not contain substances that reduce adhesion (release agents). Fresh mineral surfaces (plaster, putty), concrete before priming should be soaked for at least 28 days at a temperature of not less than 10 ° C, the permissible residual moisture reason - not more than 8%. The old surface previously painted with mineral paints, a loose cover, loose material base, chalk or lime-chalky coating was removed completely washing machines under high pressure or by mechanical means. After wet cleaning is necessary to give the ground dry well. Peeled surface and coating defects are aligned plaster solution or polymer fillers, sanded and cleaned of abrasive residues. Glossy concrete surface treated mechanically to impart roughness (surface must be brushed). Speakers metal parts (valves, nail heads, etc.) cleaned of rust and paint primer "Akvapraym" (TU BY 500021625.125) or primer "LidAkril" (TU BY 500021625.124), or primer-enamel "Ekolyuks" (TU BY 500021625.145 ). Coating: Primer stirred before use and diluted with water. primer recommended dilution with water in a proportion of 1 to moderately absorbent substrates: 1 for highly absorbent surfaces - 2: 1. The primer is applied to the surface with a brush, roller or brush in one - two layers (depending on the absorbency of the surface) at ambient temperature and the surface from + 7 ° C to + 35 ° C, under favorable weather conditions, ie, in the absence of rain, strong wind or fog. After the rain spending coloring should only after 2 - 3 days of exposure the surface at a temperature below 15 ° C. If you deviate from these recommendations may occur deterioration in the performance and manufacturability of applying primers. The drying time of primer at least 2 hours at ambient temperature (20 ± 2) ° C and a relative humidity of 65%. When reducing the temperature or humidity change primer drying time is increased to 4 hours. Consumption 100 - 125 g / m2, depending on roughness, porosity, absorbency of the substrate, application method, skill malaria and other factors.. More precisely, consumption is determined by a trial coating. When priming textured and highly absorbent surfaces flow can reach up to 200 g / m2. Subsequent layers of paint applied after 2 hours at a temperature of (20 ± 2) ° C and a relative humidity of 65%. It is not allowed to mix with other primer paints and solvents of any kind. Dilute with water only. Tools and containers wash water for at least 10 - 15 minutes after the completion of the work. After using the primers as intended packaging with product residues should be kept tightly closed closures and sent to the household dustbin Storage: The primer is stored in closed warehouses at ambient temperature from + 5 ° C to + 35 ° C. Do not allow direct sunlight. In winter, the primer is transported in insulated truck. Precautions: Priming is fire- and explosion-proof. Persons related to the paint work must be provided with personal protective equipment (overalls, safety glasses, rubber gloves). In case of accidental contact with the primer in the eyes, mucous membranes and skin, rinse with plenty of water. The dried coating has no toxic effects on the human body.

Another products from the category "Primers"

Belarus
It is intended for priming and strengthening loose, porous, fragile and grinding surfaces before applying water-dispersion paints and performance of the painting, wallpaper, plaster and flooring work ...
Belarus
It is designed for priming metal and wood surfaces for coating various enamels.
Belarus
Primer GF-021 "L" is designed for priming metal and wood surfaces for coating various enamels.