Primer Fastpraym accelerated drying

Sector: Primers
Price: Contract Price
Minimum Order: От 600 кг.
Packaging: Tin
Terms of Delivery: FCA Lida
Full Product Information:
Type: Primer "Fastpraym" is a suspension of pigments and additives in the modified alkyd resin. Benefits: rapid curing of the primer at 20 ° C; high quality of members of the pigments gives a primer coating obtained excellent decorative properties - forms a smooth matte surface; due to the content in the composition of the soil carefully selected complex of anticorrosion pigments, preventing the development of corrosion on the metal; coating has good adhesion to the metal; primer forms a weatherproof, waterproof, resistant to the action of mineral oil and diesel fuel coating. Surface preparation: metal surface before applying the primer must be thoroughly cleaned from dust, rust, scale and other impurities (must be removed incision burrs, weld spatter, sharp edges, corners, battlements and welds; on the surface must be free of grease, marking paint and other substances, such as mineral pollution, water-soluble salts that affect the quality of surface preparation), sanded, degreased and dry. The most thoroughly be cleaned surface zone of welds of up to 3 cm from the flux residues, and dross alkaline oxides formed during welding. To improve protective properties of the surface is recommended to clean the sand or grit blasting to purity oxides from 1 - 2. The color of the produce, not later than 4 hours after surface preparation. In welds, end edges and hard to reach areas before painting is done applying a primer with a brush in the form of "strip layer" Previously painted surfaces must be cleaned of dust, grease, grind, degrease, dry and make a test staining. In case of blistering or peeling old paint must be removed. To avoid moisture condensation substrate temperature should be above the dew point temperature of not less than 3 ° C. Coating: The primer is applied by pneumatic and airless spray or brush. Before applying the primer thoroughly mixed, if necessary, diluted with xylene (GOST 9410), o-xylene (TU BY 300042199.015) or with solvent (GOST 10214) in an amount of not more than 20% by weight of the primer, filtered and applied as one - two layers. Brush primer can be applied at the output viscosity. Drying time single-layer coating the primer at (20 ± 2) ° C, relative humidity of 80% - no more than 25 min. The thickness of the dried coating at least a single layer 15 micron after sandblasting or shot peening the coating thickness must be increased to account for the degree of surface roughness Ra. If necessary, the application of an additional primer layer is recommended to withstand the coating 5 - 7 minutes at a temperature (20 ± 2) ° C and a relative humidity of 80%. Increasing the thickness of the coating provides a better protective properties. For the final formation of the colored coating product before use is recommended to sustain 5 days at a temperature (20 ± 2) ° C and a relative humidity of 80%. Primer consumption per single-layer coating 80 - 100 g / m? excluding the surface preparation, application method, a primer color, staff, coating thickness, etc. Precautions: When carrying out painting work in confined spaces, as well as after their completion requires careful ventilation. To protect the skin of hands to use rubber gloves. Storage: The primer is stored in a tightly closed container, protected from moisture and direct sunlight and away from heating appliances out of reach of children. Keep away from fire.

Another products from the category "Primers"

Belarus
It is intended for priming and leveling the absorbency of the walls and ceilings before applying water-dispersion paints for interior and exterior use.
Belarus
It is intended for priming and strengthening loose, porous, fragile and grinding surfaces before applying water-dispersion paints and performance of the painting, wallpaper, plaster and flooring work ...
Belarus
It is designed for priming metal and wood surfaces for coating various enamels.