Painting FRESKO Facade Plus

Sector: Paints a & Lacquers
Price: Contract Price
Minimum Order: От 600 кг.
Packaging: Bucket
Terms of Delivery: FCA Lida
Full Product Information:
Type: Paint is a suspension of pigments and fillers in aqueous acrylic dispersion with the addition of various functional additives. The paint is not recommended for use in rooms with high moisture content and temperature changes (boilers, furnaces, interior baths and pools). Advantages: The paint is easy to apply, evenly distributed over the surface, it dries quickly forms a smooth matte velvety coating has a high water resistance, weather resistance and water vapor permeability, due to the content of antiseptic additives to prevent the formation of the painted surface of moss and algae. The durability of the coating - at least 10 years, subject to the application of technology. Recommendations on Application: The surface must be clean, dry, sound, have a good load-bearing capacity and can not contain substances that reduce adhesion (release agents). Fresh mineral surfaces (plaster, putty), concrete before painting should be soaked for at least 28 days at a temperature of not less than 10 ° C, the permissible residual moisture reason - not more than 8%. The glossy concrete surface is treated mechanically to impart roughness (surface must be brushed). Old, firmly hold the cover is recommended to wash with soap or detergent or soda solution (1 tablespoon per 1 liter of water) and then with clean water and dry. The old surface previously painted with mineral paints, a loose cover, loose material base, chalk or lime-chalky coating was removed completely washing machines under high pressure or by mechanical means. After wet cleaning is necessary to give the ground dry well. Peeled surface and coating defects are aligned plaster solution or polymer fillers, sanded and cleaned of abrasive residues. Surfaces with efflorescence, it is necessary to clean the dry method (brush). When working with surfaces of this type can not guarantee the durability of the coating as well as the possible re-emergence of salt deposits and thereby failure of adhesion coating to the substrate. Land surface affected by moss, algae or fungus should be cleaned with steel brushes and then apply the primer «FRESKO Antiseptic Ultra» »(TU BY 500021625.208), to prevent the re-emergence of micro-organisms. On the metal parts (valves, nail heads, etc.) is applied primer "Akvapraym" (TU BY 500021625.125) or primer "LidAkril" (TU BY 500021625.124), or priming enamel "Ekolyuks" (TU BY 500021625.145) in order to avoid rust. For priming and leveling the absorbency, reducing ink consumption, increasing the adhesion and strength of the substrate on the prepared surface is recommended «FRESKO Imprelid» priming or deep penetration primer «FRESKO Imprelid Ultra» (to strengthen the loose, porous, fragile and grinding surfaces). The application and drying primers is carried out in accordance with the recommendations in the primer data TU BY 500021625.112. As a primer coat, the paint can also be used «FRESKO Facade», pre-diluted with water at a ratio of 1: 1 Drying time - not less than 2 hours at a temperature (20 ± 2) ° C and a relative humidity of 65%. The paint is applied to a surface at ambient temperature and the surface from + 7 ° C to + 35 ° C, under favorable weather conditions, ie, in the absence of rain, strong wind or fog. After the rain spending coloring should only after 2 - 3 days of exposure the surface at a temperature below 15 ° C. In the event from these recommendations may occur deterioration in the performance and manufacturability of applying paint.

Another products from the category "Paints a & Lacquers"

Designed for painting rusted or partially corroded metal surfaces with thickness of rust tightly to keep up to 100 microns (0.1 mm). It is recommended to be used for painting surfaces, cleaning of whi...
Priming enamel designed for corrosion protection of metal surfaces (different steel structures, transmission towers and cell phone towers, crane trucks, window guards and so on. Etc.
It is designed for corrosion protection of ferrous metal products, operating at temperatures from -60 ° C to + 100 ° C, and operated in various environmental conditions, including the conditions of th...