Painting FRESKO Universal

Sector: Paints a & Lacquers
Price: Contract Price
Minimum Order: От 600 кг.
Packaging: Bucket
Terms of Delivery: FCA Lida
Full Product Information:
Type: Water-dispersed facade produce two types: «FRESKO Universal» and «FRESKO Facade Plus», which constitute the suspension of pigments and fillers in aqueous dispersions of acrylic copolymers with a variety of functional additives. Advantages: paint form a strong, durable, water-resistant, resistant to atmospheric influences coatings that are highly resistant to abrasion. Painted surfaces can be cleaned using a household detergent. Coatings based paints «FRESKO Universal» and «FRESKO Facade Plus» are weatherproof. Colors are easily applied to the surface of a roller, brush or airless spray. Surface preparation: The surface must be clean, dry, sound, have a good load-bearing capacity and can not contain substances that reduce adhesion (release agents). Fresh mineral surfaces (plaster, putty), concrete before painting should be soaked for at least 28 days at a temperature of not less than 10 ° C, the permissible residual moisture reason - not more than 8%. The glossy concrete surface is treated mechanically to impart roughness (surface must be brushed). Old, firmly hold the cover is recommended to wash with soap or detergent or soda solution (1 tablespoon per 1 liter of water) and then with clean water and dry. The old surface previously painted with mineral paints, a loose cover, loose material base, chalk or lime-chalky coating was removed completely washing machines under high pressure or by mechanical means. After wet cleaning is necessary to give the ground dry well. Peeled surface and coating defects are aligned plaster solution or polymer fillers, sanded and cleaned of abrasive residues. Surfaces with efflorescence, it is necessary to clean the dry method (brush). When working with surfaces of this type can not guarantee the durability of the coating as well as the possible re-emergence of salt deposits and thereby failure of adhesion coating to the substrate. Land surface, the affected moss, algae or fungus should be cleaned with steel brushes and then apply the primer «FRESKO Antiseptic Ultra» (TU BY 500021625.208), to prevent the re-emergence of micro-organisms. On the metal parts (valves, nail heads, etc.) is applied primer "Akvapraym" (TU BY 500021625.125) or primer "LidAkril" (TU BY 500021625.124), or priming enamel "Ekolyuks" (TU BY 500021625.145) in order to avoid rust. For priming and leveling the absorbency, reducing ink consumption, increasing the adhesion and strength of the substrate on the prepared surface is recommended «FRESKO Imprelid» priming or deep penetration primer «FRESKO Imprelid Ultra» (to strengthen the loose, porous, fragile and grinding surfaces). The application and drying primers is carried out in accordance with the recommendations in the primer data TU BY 500021625.112. As a primer coat, the paint can also be used «FRESKO Universal» «FRESKO Facade Plus», pre-diluted with water at a ratio of 1: 1. Drying time - not less than 2 hours at a temperature (20 ± 2) ° C and a relative humidity of 65%. Paint is applied to the surface at the ambient temperature and the surface from + 7 ° C to + 35 ° C, under favorable weather conditions, ie, in the absence of rain, strong wind or fog. After the rain spending coloring should only after 2 - 3 days of exposure the surface at a temperature below 15 ° C. If you deviate from these recommendations may occur deterioration in the performance and manufacturability of applying paint. In order to prevent uneven drying paints in the performance of the painting works should also avoid applying paint on the facade of the areas that are exposed to direct sunlight. For this purpose, scaffolding is recommended to close a special mesh or foil. If you deviate from these recommendations may occur deterioration in the performance and manufacturability of applying paint. Paint drying time depends on the temperature, humidity and other factors. Term life cover: The projected life of the coating paint Water-dispersed facade consisting of a primer layer (primer layer) and two layers of paint in operation NF1 - at least 10 years. The coating retains its protective and decorative properties in compliance with technical regulations requirements for the coating and drying operation in the conditions of NF1. Storage: Paints are stored in closed warehouses in polyethylene containers at ambient temperature from + 5 ° C to + 35 ° C. Keep away from direct sunlight. In the winter time, ink is transported in insulated vehicles.

Another products from the category "Paints a & Lacquers"

Belarus
Designed for painting rusted or partially corroded metal surfaces with thickness of rust tightly to keep up to 100 microns (0.1 mm). It is recommended to be used for painting surfaces, cleaning of whi...
Belarus
Priming enamel designed for corrosion protection of metal surfaces (different steel structures, transmission towers and cell phone towers, crane trucks, window guards and so on. Etc.
Belarus
It is designed for corrosion protection of ferrous metal products, operating at temperatures from -60 ° C to + 100 ° C, and operated in various environmental conditions, including the conditions of th...