Painting FRESKO Roof

Sector: Paints a & Lacquers
Price: Contract Price
Minimum Order: 600 kg
Packaging: Bucket
Terms of Delivery: FCA Lida
Full Product Information:
Type: Paint is a suspension of pigments and fillers in aqueous acrylic copolymer dispersion with the introduction of specific functional additives. Advantages: The paint creates a protective layer which protects the surface from appearing on their moss, algae, lichens, mildew and rot, reduces the amount of asbestos discharges into the ambient air, prolongs service slate. The coating is resistant to the action of atmospheric factors such as rain, snow, UV rays. Surface preparation: the painted surface (slate) must be thoroughly cleaned from dust and other contaminants, be sure to rinse with water and dry. When painting the old slate, available on its vegetation and remnants of the old paint must be removed mechanically by means of metal brushes, scrapers or use an electric drill, grinder fitted with a metal brush, then rinse the surface with water and dry it, or use the compact portable car wash with high pressure and dried. If you have any greasy stains, for their removal is best to use a solvent or gasoline. The prepared surface should be solid (not crumbled) and should not melit. After thorough cleaning and drying of the surface to be treated slate antiseptic composition (antiseptic) in order to kill any remaining deep into pores and cracks spores parasites. This procedure will prevent the growth of moss, lichen, algae, mold and rot in the future. Apply the product must be abundant and evenly with a brush or spray unit. When working with antiseptic required to use personal protective equipment - gloves, goggles, respirator. The treated surface must be protected from water and rainfall to dry completely antiseptic. Coating: the paint is thoroughly mixed before use. In use the paint diluted with water to 10% (by volume) was used as the primer layer. The use of paint as a primer layer does not require acquisition of additional primers, will reduce ink consumption on subsequent layers applied, to prevent color separation. Subsequent layers are applied to the original viscosity. Allowed dilution with water up to 5%. The paint is applied to the prepared surface of the asbestos-cement sheets with a brush, by air or airless spray at least two layers, not taking into account the primer. Begin to paint the top best. This will help prevent ink stains on the painted surface. In this case it is best to paint verticals, ie one vertical row of slate, then the second and so on, prokrashivaya joints, ends, corners and other hard to reach places. each layer Drying time at least 4 hours at ambient temperature of at least 20 ° C and a relative humidity of 65%. At lower temperatures and high humidity, the drying time can be increased. Painting should be done under favorable weather conditions, ie, at a temperature of not lower than 15 ° C, in the absence of rain, strong wind or fog. We do not recommend painting asbestos cement sheets (slate) heated in the sun at a temperature above 30 ° C. It is not allowed to mix the paint with other paints and solvents of any kind. At the end of the container, tools, equipment, wash with soap and water before the paint drying. p Stubborn stains removed with acetone. Paint consumption per single-layer coating - 150 - 200 g / m. Flow rate depends on the surface state of preparation, absorbency and surface roughness, paint colors, the method of application and other factors. It is not allowed to mix the paint with other paints and organic solvents of any kind. Storage: The paint is stored in closed warehouses at ambient temperature from + 5 ° C to + 35 ° C. Do not allow direct sunlight. In winter, the ink is transported in insulated truck and stored in a heated warehouse. Precautions: Paint fire and explosion. The dried coating has no toxic effects on the environment and the human body. In case of accidental contact with eyes, mucous membranes and skin with plenty of water. Persons related to the paint work must be provided with personal protective equipment (overalls, safety glasses, rubber gloves).

Another products from the category "Paints a & Lacquers"

Designed for painting rusted or partially corroded metal surfaces with thickness of rust tightly to keep up to 100 microns (0.1 mm). It is recommended to be used for painting surfaces, cleaning of whi...
Priming enamel designed for corrosion protection of metal surfaces (different steel structures, transmission towers and cell phone towers, crane trucks, window guards and so on. Etc.
It is designed for corrosion protection of ferrous metal products, operating at temperatures from -60 ° C to + 100 ° C, and operated in various environmental conditions, including the conditions of th...