Varnish MCH-212 (parquet) glossy

Sector: Paints a & Lacquers
Price: Contract Price
Minimum Order: От 600 кг.
Packaging: Tin
Terms of Delivery: FCA Lida
Full Product Information:
Type: Nail MCH 212 is a two-component system consisting of semi-finished lacquer and acid hardener to be mixed before use. Prefabricated varnish is a mixture of an alkyd resin solution in o-xylene and urea-formaldehyde resin in butyl alcohol, acid hardener - toluenesulfonic parotoluolsulfokisloty in solution or butanol. Advantage: The varnish is easy to apply, dries quickly, has good adhesion properties, highlights the natural wood texture. Lac is ideal for professional use and for use in the home. Surface preparation: The surface to be coated must be ground fine sandpaper (4-H (M40) or P280 / 320) or belt sanders, free of grease, wax, dust and other possible contaminants, sanding dust must be carefully removed. sanding quality significantly improves the appearance of the varnish. Previously painted surfaces sanded to remove dust, conduct a test varnishing a small surface area to check the compatibility of old and new coatings. Coating application: Before application of semi-finished lacquer mixed with acid hardener in a ratio of 100 parts by weight of semi-finished varnish and 8 parts by weight of hardener, mix thoroughly. If necessary, use the RCU-1 thinner (TU 6-10-1326-77) or a mixture of solvents xylene (orthoxylene): butyl alcohol in a ratio of 1: 1. Allowed to use a solvent 646 (GOST 18188). for paints and varnishes. If necessary, before applying lacquer filtered through nylon mesh. Viability composed varnish - 8 hours in a closed container at a temperature of (20 ± 5) ° C. Ready paint applied with a soft brush or a short-nap roller at ambient temperature, the paint material and the surface is not lower than 15 ° C, relative humidity of 65%. Wood moisture should not exceed 10%. During operation, it is necessary to ensure constant ventilation (avoid drafts!), Avoid direct sunlight on the surface. The amount of coats of lacquer - at least two. The intermediate drying between coats - 3 hours at a temperature (20 ± 2) ° C and relative humidity (65 ± 5)%. At lower temperatures or high humidity, the drying time can be increased. Do not apply a new coat of varnish on not dried out the previous layer. Interlayer polishing to produce, if necessary. Drying time until possible careful walking on the floor - at least 8 hours after the last coat of varnish has dried, the drying up of full use of the surface (carpet flooring, installation of furniture, of wet cleaning) - not less than 7 days. Consumption varnish on the single-layer coating is 50 - 60 g / m2 and may vary depending on the absorbency of the substrate and the roughness skill master coating thickness and other factors. Precautions: during painting works and after their completion to ventilate the room. To protect the skin of hands to use rubber gloves. Transportation and Storage: semi-acid varnish and hardener in accordance with GOST 9980.5 and STB 04/11/01.

Another products from the category "Paints a & Lacquers"

Designed for painting rusted or partially corroded metal surfaces with thickness of rust tightly to keep up to 100 microns (0.1 mm). It is recommended to be used for painting surfaces, cleaning of whi...
Priming enamel designed for corrosion protection of metal surfaces (different steel structures, transmission towers and cell phone towers, crane trucks, window guards and so on. Etc.
It is designed for corrosion protection of ferrous metal products, operating at temperatures from -60 ° C to + 100 ° C, and operated in various environmental conditions, including the conditions of th...