Enamel PF-115

Sector: Paints a & Lacquers
Price: Contract Price
Minimum Order: От 600 кг.
Packaging: Tin
Terms of Delivery: FCA Lida
Full Product Information:
Type: Enamel PF-115 is a suspension of pigments and fillers in addition to Nitrocellulose lacquer solvents and special additives desiccant. Advantages: - enamel coating forms a flat, smooth surface provides a weather-resistant, glossy surface; elastic, has a good decorative and protective properties; Enamel one component storage stable, it has excellent paint properties, which is convenient to use; Enamel is ideal for painting wood surfaces that do not require high performance: residential and municipal buildings and wooden fences and metal surfaces (fences, railings, fences, etc.); Enamel film is resistant to temperature fluctuations from -50 ° C to + 60 ° C Preparation: Wooden surface before applying the enamel must be cleaned of tar, dried, sanded and de-dusted. To improve the protective and decorative properties, as well as reducing the consumption of enamel unpainted surface is recommended pre-primed with GF-021, GF-021 "L". With the previously painted surface must remove various impurities, completely remove loose coating, the surface is sanded and de-dusted. Metal surface before applying the enamel must be thoroughly cleaned from dust, rust, scale and other impurities (must be removed incision burrs, weld spatter, sharp edges, corners, battlements and welds; on the surface must be free of grease, marking paint and other substances such as mineral pollution, water-soluble salts that affect the quality of surface preparation), sanded, degreased, allowed to dry and primed primers GF-021 and GF-021 "L", or GF-0119, or GF-0119 "L". Previously painted surfaces must be cleaned of dust, grease, grind, degrease, dry and make a test staining. In case of blistering or peeling old paint must be removed. To avoid moisture condensation substrate temperature should be above the dew point temperature of not less than 3 ° C. Recommendations Application: Before applying the enamel thoroughly mixed, diluted nephras-S4-150 / 200, if necessary (TU RB 100006485.147), mineral spirits (GOST 3134) or a mixture of these solvents with solvent (TU 38.101809) at a ratio of 1: 1 in an amount of not more than 25% by weight of the enamel. The enamel is applied in 1 - 2 layers by brush, roller or by pneumatic spraying. For coloring products Elektropol enamel diluted to working viscosity diluent ER-4B or ER-3B. The thickness of the dried coating monolayer - not less than 20 microns. When applied by pneumatic spray enamel was diluted with a solvent in an amount not exceeding 25% by weight of the enamel, but when applied by brush or roller - in an amount of not more than 5% by weight of the enamel. Enamel can be applied by brush to the original viscosity. Drying time single-layer coating - no more than 24 hours at a temperature (20 ± 2) ° C (except for the red, cherry) and a relative humidity of 80%. At lower temperatures and high relative humidity of the drying time increases. A subsequent layer of enamel must be applied after drying the previous layer. After staining should avoid strong mechanical stress for 7 days. Theoretical rate for single-layer coating is 100 - 180 g / m. without taking into account the complexity of the painted surface, application method, the color of enamel, staff development and other factors.

Another products from the category "Paints a & Lacquers"

Designed for painting rusted or partially corroded metal surfaces with thickness of rust tightly to keep up to 100 microns (0.1 mm). It is recommended to be used for painting surfaces, cleaning of whi...
Priming enamel designed for corrosion protection of metal surfaces (different steel structures, transmission towers and cell phone towers, crane trucks, window guards and so on. Etc.
It is designed for corrosion protection of ferrous metal products, operating at temperatures from -60 ° C to + 100 ° C, and operated in various environmental conditions, including the conditions of th...