Enamel PF-115 M

Sector: Paints a & Lacquers
Price: Contract Price
Minimum Order: От 600 кг.
Packaging: Tin
Terms of Delivery: FCA Lida
Full Product Information:
Type: Enamel PF-115 "M" is a suspension of pigments and fillers in addition to Nitrocellulose lacquer solvents and special additives desiccant. Benefits: - Enamel coating forms a flat, smooth surface provides a weatherproof, matte finish; elastic, has a good decorative and protective properties; - One-component enamel, storage stable, have excellent paint properties, which is convenient to use; - Enamel is ideal for painting wood surfaces that do not require high performance: residential and municipal buildings and wooden fences and metal surfaces (fences, railings, fences, etc.). Surface preparation: Wooden surface before applying the enamel must be cleaned of tar, dried, sanded and de-dusted. To improve the protective and decorative properties, as well as reducing the consumption of enamel unpainted surface pre-primed with recommended GF-021, GF-021 "L". Metal surface before applying the enamel must be thoroughly cleaned of rust, scale and other debris, sanded, degreased, dried and primed primers GF-021, GF-021 "L", the GF-0119 and GF 0119 "L". To avoid moisture condensation substrate temperature should be above the dew point temperature of not less than 3 ° C. Previously painted surfaces are cleaned from fragile layers of old flooring, peel off the old paint is removed, the entire surface is sanded, dedusted, degreased and dried. It is recommended to perform a test staining, in the case of blistering or peeling of the old coating, it must be removed. Coating: before applying the enamel thoroughly mixed, diluted nephras if necessary - S4-150 / 200 (TU 100006485.147 RB), mineral spirits (GOST 3134) or a mixture of these solvents with solvent (38.101809 TU) in 1: 1 ratio by weight in an amount of not more than 20% by weight of the enamel filtered. The enamel is applied in 1 - 2 layers by brush, roller, by pneumatic spraying or flow coating jet. The thickness of the dried coating monolayer - not less than 20 microns. Drying time single-layer coating - no more than 24 hours at a temperature (20 ± 2) ° C and a relative humidity of 80%. At lower temperatures and high relative humidity of the drying time increases. A subsequent layer of enamel must be applied after drying the previous layer. After staining should avoid strong mechanical stress for 5 days. Allowed coating hot drying at a temperature of 105 - 110 ° C for 1 hour before further exposure operation for at least 24 hours. Enamel consumption is 100 - 180 g / m2, depending on the complexity of the preparation and the painted surface color coating method, and other factors. Precautions: Persons related to the paint work must be provided with personal protective equipment (overalls, safety glasses and rubber gloves). In carrying out painting works and after their completion the room should thoroughly ventilate the room. Storage: Enamel stored in a tightly closed container, protected from moisture and direct sunlight and away from heating appliances out of reach of children. Keep away from fire! If stored at low temperatures prior to application of the enamel incubated in a warm room (to avoid condensation on the painted surface with color) for at least 24 hours.

Another products from the category "Paints a & Lacquers"

Designed for painting rusted or partially corroded metal surfaces with thickness of rust tightly to keep up to 100 microns (0.1 mm). It is recommended to be used for painting surfaces, cleaning of whi...
Priming enamel designed for corrosion protection of metal surfaces (different steel structures, transmission towers and cell phone towers, crane trucks, window guards and so on. Etc.
It is designed for corrosion protection of ferrous metal products, operating at temperatures from -60 ° C to + 100 ° C, and operated in various environmental conditions, including the conditions of th...