Enamel PF-266 luxury

Sector: Paints a & Lacquers
Price: Contract Price
Minimum Order: От 600 кг.
Packaging: Tin
Terms of Delivery: FCA Lida
Full Product Information:
Type: Enamel PF-266 "luxury" is a suspension of pigments in alkyd varnish with the addition of a solvent, drier and special additives. Benefits: enamel coating forms an even, smooth, durable surface that has water resistance and withstand repeated cleaning with liquid detergent; provides a high-gloss coating; It has good decorative and protective properties; Enamel one component storage stable, it has excellent properties of the paint, which is convenient to use. Enamel is ideal for painting wooden floors. life of the coating - at least 2 years. Surface preparation: Unpainted wooden surfaces must be cleaned of tar, dry, clean lint remover sandpaper (allowed to use sandpaper grit size 4 or 5 in accordance with GOST 6456) and remove dust. To reduce the consumption of enamel and increase the quality of finishing, unpainted surface is recommended pre-primed with GF-021 (GOST 25129) or other alkyd primer, clean the abrasive cloth, avoiding stripping to a wooden surface. With the previously painted surface must remove various impurities, completely remove loose coating, the surface is sanded and de-dusted. enameling terms: the room temperature and the enamel is not below 5 ° C; relative humidity less than 80%; moisture content of the surface - 8 - 10%. Coating: before applying the enamel thoroughly mixed, diluted nephras-S4-150 / 200, if necessary (TU RB 100006485.147), mineral spirits (GOST 3134) and filtered through a layer of gauze. The enamel is applied by brush or roller on previously painted wooden surfaces in 1 - 2 bed, new - 2 - 3 layers. Drying time of each layer of enamel at temperature (20 ± 2) ° C and a relative humidity of 80% -. not more than 24 hours after staining should avoid strong mechanical stress for 7 days. Drying time single-layer coating - no more than 24 hours at a temperature (20 ± 2) ° C and a relative humidity of 80%. At lower temperatures and high relative humidity of the drying time increases. A subsequent layer of enamel must be applied after drying the previous layer. After staining should avoid strong mechanical stress for 7 days. Flow enamel layer coating is 65 - 100 g / m depending on the application, absorbency and surface roughness, and other factors.

Another products from the category "Paints a & Lacquers"

Designed for painting rusted or partially corroded metal surfaces with thickness of rust tightly to keep up to 100 microns (0.1 mm). It is recommended to be used for painting surfaces, cleaning of whi...
Priming enamel designed for corrosion protection of metal surfaces (different steel structures, transmission towers and cell phone towers, crane trucks, window guards and so on. Etc.
It is designed for corrosion protection of ferrous metal products, operating at temperatures from -60 ° C to + 100 ° C, and operated in various environmental conditions, including the conditions of th...