Enamel ML-12 K

Sector: Paints a & Lacquers
Price: Contract Price
Minimum Order: От 600 кг.
Packaging: Tin
Terms of Delivery: FCA Lida
Full Product Information:
Type: Enamel is a suspension of pigments in solutions of melamine resins in organic solvents. Advantages: enamel coatings have high decorative properties when used in atmospheric conditions and indoors. Enamels different bright color, high gloss and the degree of dispersion (10 microns). Enamel coating resistant to temperature changes ranging from -60 ° C to + 60 ° C. Preparation: Prior to application of the enamel surface is primed, if needed, sanded, degreased and dried thoroughly. Previously painted surfaces are cleaned from fragile layers of old flooring, peel off the old paint is removed, the entire surface is cleaned mechanically, dedusted, degreased and dried. If unknown type of old paint, it should be checked for compatibility (it is recommended to control staining of small surface area). In case of blistering or peeling of the old coating must be completely removed. To avoid moisture condensation substrate temperature should be above the dew point temperature of not less than 3 ° C. To improve adhesion and protective properties of complex coating is recommended to pre-phosphating or priming Phosphating primer VL-02 (GOST 12707) prepared by the surface of products. For subsequent priming coats may be used epoxy, PVB, glyptal and phenolic resins. Recommended primer EP-0228 (TU 06/10/1943), the EP-045 (TU BY 500021625.106), GF 0119 (GOST 23343), GF-021 (GOST 25129). Recommendations on application: The enamel is applied to the primed surface by pneumatic and electrostatic spraying. When retouching small areas can be applied by brush. Enamel thoroughly mixed and filtered if necessary. When applied by pneumatic spray enamel diluted with solvent oil (GOST 10214), when sprayed in electric field - diluents ER-1B RE-2B (GOST 18187) in an amount of not more than 25% by weight of the undiluted enamel. Brushing enamel, optionally diluted with solvent in an amount of not more than 5% by weight of the undiluted enamel. The enamel is applied at a temperature of 15 - 35 ° C and a relative humidity of 80% in two coats "wet on wet" technique with intermediate drying at a temperature (20 ± 2) ° C for 5 - 7 minutes, maintaining the temperature (20 ± 2) ° C for 5 - 7 min and final drying at a temperature of 130 - 135 ° C for 35 min. The thickness of the dried enamel coating dual layer should be less than 35 microns. Enamel consumption per double-layer dry coating of 100 - 120 g / m without taking into account the complexity of the painted surface, application method, the color of enamel, staff development and other factors. To reduce the drying temperature enamel coating must add hardener Izuru - 021 in an amount of 10% by weight of the undiluted enamel. Drying time two-coat enamel with hardener: at (20 ± 2) ° C for 24 hours; at a temperature (60 ± 2) ° C for 2 hours; at a temperature (80 ± 2) ° C for 1 hour; at a temperature (90 ± 2) ° C for 40 min. Coating Lifetime: The coating system consisting of two layers of enamel applied to a primed surface (Phosphating primer VL-02 (GOST 12707) and primer EP-0228 (TU 10/06/1943) primer layer thickness of 18 - 25 microns), in under moderately cold climate keeps the protective properties for at least 6 years old and decorative properties for at least 3 years, and in a tropical climate keeps the protective and decorative properties of 1 year. The thickness of the complex coating after drying should be 48 - 60 microns.

Another products from the category "Paints a & Lacquers"

Designed for painting rusted or partially corroded metal surfaces with thickness of rust tightly to keep up to 100 microns (0.1 mm). It is recommended to be used for painting surfaces, cleaning of whi...
Priming enamel designed for corrosion protection of metal surfaces (different steel structures, transmission towers and cell phone towers, crane trucks, window guards and so on. Etc.
It is designed for corrosion protection of ferrous metal products, operating at temperatures from -60 ° C to + 100 ° C, and operated in various environmental conditions, including the conditions of th...