Enamel ML-1214 ME

Sector: Paints and lacquers
Price: 10.64 BYN
Minimum Order: от 600 кг.
Packaging: Tin
Terms of Delivery: FCA Lida
Full Product Information:
Type: Enamel is a suspension of pigments in alkidnomelaminovom varnish with organic solvents and addition of functional additives.   Advantages: enamel provides a high gloss finish with metallic effect. enamel coatings have high decorative properties when used in atmospheric conditions and indoors. Enamel coating resistant to temperature changes ranging from -60 ° C to + 60 ° C.            Surface preparation: Before applying the enamel primed surface sanded, if necessary, dedusted, degreased and thoroughly dried. Previously painted surfaces are cleaned from fragile layers of old flooring, peel off the old paint is removed, the entire surface is cleaned mechanically, dedusted, degreased and dried. To avoid moisture condensation substrate temperature should be above the dew point temperature of not less than 3 ° C. Recommended primer: EP-045, EP-045K (TU BY 5000021625.106), GF 0119 (GOST 23343) produced by JSC "Lakokraska".   Recommendations on application: The enamel is applied to the primed surface by pneumatic and electrostatic spraying. When retouching small areas of enamel can be applied by brush. Before applying the enamel thoroughly mixed and filtered if necessary. When applied by pneumatic spray enamel diluted with xylene (GOST 9949 or GOST 9410), o-xylene (TU BY 300042199.015) or diluent P-197 (TU 10/06/1100) in the amount of 18 - 25% by weight of the undiluted enamel when applied by electrostatic spray - diluent RE-2B (GOST 18187) in an amount necessary to achieve the specific volume electric resistance in the range from 5 x 104 to 5 x 105 ohm-m. Brushing enamel, if necessary, diluted with xylene (GOST 9949 or GOST 9410), orthoxylene (TU BY 300042199.015) or diluent P-197 (TU 06/10/1100) in an amount of not more than 5% by weight of the undiluted enamel. The enamel is applied at a temperature of 15 - 25 ° C and a relative humidity of 80% in two layers with intermediate flash between coats for 3 - 5 minutes at a temperature (20 ± 2) ° C and final drying at a temperature of 130 - 135 ° C for 30 min. The thickness of the primer coating and complex enamel after drying should be less than 40 microns.   Enamel consumption per double-layer dry coating thickness 30 - 40 mm 70 - 100 g / m excluding the complexity of preparation and the painted surface metodananeseniya, enamel color, staff, and other factors.   coating Lifetime: The coating system consisting of two layers of enamel applied to a primed surface (primer EP-045 (TU BY 5000021625.106) thickness 10 - 15 microns) keeps protective and decorative features in a moderately cold climate for at least 2 years in a tropical climate within 1 year. More information is available on our website: http://www.lidalkm.by section directory. The price of the products negotiated and formed the basis of the terms of payment, volume purchases and districts. For the cost of the product, please contact the following numbers: by the RB in procurement in the Vitebsk region. - (154) 53-85-82; in the Gomel region. - (154) 53-85-83; in the Grodno region. - (154) 53-85-84; in the Minsk region. - (154) 53-85-85; in the Mogilev region. - (154) 53-85-86; Group of foreign economic activity - 375 154 53-85-87. Representation in Russia: OOO "Belneftekhim-RUS" - + 7-495-308-22-36; representation in Ukraine: "TH-LK-Ukraine" - + 38-0462-67-20-22; representation the Republic of Poland: BNH-Oil Polska - + 48-22-508-01-15.

Another products from the category "Paints and lacquers"

Belarus
Designed for painting rusted or partially corroded metal surfaces with thickness of rust tightly to keep up to 100 microns (0.1 mm). It is recommended to be used for painting surfaces, cleaning of whi...
Belarus
Priming enamel designed for corrosion protection of metal surfaces (different steel structures, transmission towers and cell phone towers, crane trucks, window guards and so on. Etc.
Belarus
It is designed for corrosion protection of ferrous metal products, operating at temperatures from -60 ° C to + 100 ° C, and operated in various environmental conditions, including the conditions of th...