Home » Goods » Construction, Maintenance & Realty » Construction Materials » Paints a & Lacquers » Enamel Fastkout accelerated drying
Enamel Fastkout accelerated drying
Sector: Paints a & Lacquers
Price: Contract Price
Minimum Order: От 600 кг.
Terms of Delivery: FCA Lida
Full Product Information:Type: Enamel "Fastkout" represents the pigment suspension and fillers in a modified alkyd resin with the addition of solvents and special additives. Benefits: enamel coating dries quickly at 20 ° C; high quality make up the enamel pigments gives the resulting coating excellent decorative properties; coating has good adhesion to the metal; Enamel paint has good properties. The above-esteem greatly simplifies the process of painting the metal surfaces. Surface preparation: Surface preparation before painting with enamel products accelerated drying is carried out in accordance with the requirements of technical regulations to apply primer. Before applying the enamel primed surface sanded, degreased and thoroughly dried. Previously painted surfaces are cleaned from fragile layers of old flooring, peel off the old paint is removed, the entire surface is sanded, dedusted, degreased and dried. It is recommended to control a small area of the surface staining. To avoid moisture condensation substrate temperature should be above the dew point temperature of not less than 3 ° C. Coating: before applying the enamel must be thoroughly mixed and diluted with xylene (GOST 9410), orthoxylene (TU BY 300042199.015) or with solvent (GOST 10214) in an amount of up to 35% by weight of the undiluted enamel and filtered through a mesh №02N-01H (GOST 6613) and applied by pneumatic spraying. On small areas of enamel may be applied by brush to the outlet viscosity. Do not use as a solvent Nefras - C4 - 150/200 (white spirit). The enamel is applied in one or two layers and each layer is dried at a temperature (20 ± 2) ° C -not less than 60 minutes or at a temperature (80 ± 2) ° C - at least 20 minutes. The thickness of the dried coating monolayer should be at least 20 microns. For the final formation of the colored coating product before use is recommended to sustain 7 days. Flow enamel layer coating 80 - 130 g / m2, excluding the complexity of preparation and the painted surface, enamel color, the method of application and other factors. Precautions: When carrying out painting works, as well as after their closure should be thoroughly ventilate the room. To protect the skin of hands to use rubber gloves. Storage: Enamel stored in a tightly closed container, protected from moisture and direct sunlight and away from heating appliances out of reach of children. Keep away from fire. The warranty period is 6 months from date of manufacture.
Another products from the category "Paints a & Lacquers"
Designed for painting rusted or partially corroded metal surfaces with thickness of rust tightly to keep up to 100 microns (0.1 mm). It is recommended to be used for painting surfaces, cleaning of whi...
Priming enamel designed for corrosion protection of metal surfaces (different steel structures, transmission towers and cell phone towers, crane trucks, window guards and so on. Etc.
It is designed for corrosion protection of ferrous metal products, operating at temperatures from -60 ° C to + 100 ° C, and operated in various environmental conditions, including the conditions of th...